So besticken Sie ganz einfach einen Hut oder eine Mütze maschinell | Vollständiger Leitfaden

So besticken Sie ganz einfach einen Hut oder eine Mütze maschinell | Vollständiger Leitfaden

Einführung:

Embroider on a hat or cap using an embroidery machine is a fun way to show off your own style. Zusätzlich, it is a satisfying hobby that can be learned at home with only a few inexpensive tools. With a little practice, you can make beautiful, complicated designs on your best hats.

This comprehensive guide covers all the fundamentals of Maschinenstickerei for caps and hats. We’;ll review everything you need to know, from terminologies to the best embroidery digitizing software.

How to Easily Machine Embroider on a Hat or Cap

So besticken Sie ganz einfach einen Hut oder eine Mütze maschinell | Vollständiger Leitfaden

Embroider On Hat Or Cap Terminology And Types

Understanding the terms used for hats and caps is crucial before we start the embroidery procedure. These are some important terms to understand:

A) Crown

The top section of a hat on the head is called the crown. Typisch, a fused buckram backing is found inside a structured cap’;s crown, supporting it. The crown of the cap comprises 4, 5, oder 6 panels. Zum Beispiel, baseball caps typically have a 6-panel cap, the most popular configuration.

b) Visor

A visor is a flat or curved bill extending from the hat’;s front and providing shade and sun protection. A sun visor section can be flat or curved, and the strap frequently has an adjustable Velcro closure in the back.

Visors are often worn in outdoor activities such as golf, tennis, volleyball, and softball, where eye protection from direct sunlight is desired, and the absence of a crown allows for airflow.

C) Buckram

The backing you can see on the rear of the front panels is that. This makes the twill fabric stiffer and provides a stable foundation for embroidery. Buckram is a cotton fabric that has been stabilized to make it stiffer; jedoch, it can also be constructed of plastic mesh.

Using plastic mesh caps, use less dense designs because these can generate bullet-proof zones that break Faden or needles.

d) Sweatband

A sweatband is a band that lines the interior of a hat or cap to shield it from sweat from the head. It is commonly constructed of leather for felt hats and fabric for straw hats. It increases the lifespan of the hat or cap and keeps it clean and dry.

e) Closure

In order to make a hat fit better, a closure is used. It is usually attached to the back of the hat and comes in a variety of forms, including snug, flexibel, and adjustable. Closures are usually made with hooks and loops, clips, or plastic snaps.

Embroider On Hat Or Cap: Choose Your Suitable Cap

Variety is key in the world of ball caps. If you go to a cap website or catalog, you will see that you have thousands of options to choose from. You can customize your hat in a wide variety of ways, including color, material, crown height, bill style, back closures, und mehr.

There are hundreds of hat brands and styles available. Jedoch, most caps fall into one of three categories:

1. OPF Hats For Embroidery

OPF Hats For Embroidery
OPF Hats For Embroidery

Embroiderers often choose OPF (One-piece front) hats because they are simple to hoop and embroider and have no center seam. OPF caps have a laminated back that provides them stability, making them perfect for embroidery. The wide range of OPF hat designs and colors makes them a flexible choice for any embroidered design.

EMdigitizing offer embroidery digitizing services for OPF hats. We can digitize simple to comlex designs that everyone will love. We digitize design according to your needs and choices with 24/7 Kundendienst.

2. Varsity Hats For Embroidery

Varsity Hats For Embroidery
Varsity Hats For Embroidery

Collegiate or varsity hats are a standard choice for embroidery. They usually have a structured crown and bill and are made of wool or a wool mix. Hats used by high school and college athletes typically feature an embroidered team logo, Monogramm, or name. Zusätzlich, they can have their name, number, or other personalized designs embroidered on them.

Many people choose to embroider on varsity or college caps because they are durable, stylish, and can be changed to fit any team or group. You can also use them to make promotional hats and giveaways.

3. Sports Caps For Embroidery

Sports Caps For Embroidery
Sports Caps For Embroidery

The simplicity and popularity of sports caps make them ideal for embroidery. They last a long time, are easy to wear, and have a lot of space for customization. They’;re a great accessory that can be worn anywhere, from the gym to a night out with friends to the office.

How To Embroider Cap Hats?

There are many options available for the placement of designs on hats. Some options are given below. But before we have something exciting for you. We offer embroidery digitizing services for hats. We design it in such a way that you can place it anywhere on the hat and make it beautiful.

Let’s dive in:

Embroidering The Front And Center Of Hats

Embroidering The Front And Center Of Hats
Embroidering The Front And Center Of Hats

The front of a cap is where most embroidery goes because it’;s the most visible and easiest to embroider. The primary distinction between ball caps is whether or not the front panels are structured.

Most structured caps have a buckram backing fused together on the inside. This makes the top of the cap stand up. Hats that aren’;t structured, like school and college caps, don’;t have this and tend to be more flexible.

It’;s easy to embroider on structured caps that have buckram backing inside. You can use cap backing to give your unstructured cap some shape. You don’;t have to use the back clip on wide-angle cap frames, especially for bigger designs.

Embroidering The Side Of Hats

Embroidering The Side Of Hats
Embroidering The Side Of Hats

For side placement, you need to use the back clip(s) on the cap frame. The main job of the back clip(s) is to attach caps to the side. Wide-angle cap frames aren’;t all the same!

The most noticeable difference is the number and placement of clips on the back. Some wide-angle frames have a huge clip on the back or sometimes two smaller ones.

Some companies employ multi-clips. You should always use side clips when placing caps on the side. If caps don’;t have buckram on the sides, you need cap backing for side places.

Embroidering The Back Of Hats

Embroidering The Back Of Hats
Embroidering The Back Of Hats

The placements on the back of the caps are easy. Am meisten Stickmaschinen come with a small circular hoop specifically designed for this purpose.

Digitizing Embroidery Designs For Cap And Hats

Digitizing Embroidery Designs For Cap And Hats
Digitizing Embroidery Designs For Cap And Hats

To run on a machine, a hat must be hooped properly. More importantly, the embroidery pattern must be scanned exactly for a curved surface.

Designs need to be digitalized just for caps to get the best results. Most professional digitizers will digitize a hat design considering its size. If you can’;t find the right design online or rather not pay to have it outsourced, you can try digitizing it yourself.

But it can be challenging to digitize design yourself, so here you need digitizing experts.

Mach dir keine Sorge!

EMdigitizing ist für Sie da. We offer embroidery digitizing services with fast turnaround at affordable prices. Wir digitalisieren Designs in jedem file format so your machine can read them easily. Sie können uns kontaktieren, und wir werden uns so schnell wie möglich bei Ihnen melden.

Our experts suggest that when digitizing caps, you should always begin at the bottom and work your way up to the middle, then to the left and right sides of the design. This technique, called center-out digitizing, is used to lessen the pull and push effect.

But you need Software zum Digitalisieren von Stickereien if you want to digitize your design.

Embroidery Digitizing Software For Hats: Best Options

Embroidery Digitizing Software For Hats
Embroidery Digitizing Software For Hats

There are a number of choices when it comes to software for digitizing embroidery designs for hats. For those interested in embroidery digitizing for hats and caps, here are some programs to consider:

  • Schraffur-Stickerei: Schraffur-Stickerei is a well-liked digitizing software for embroidery, and it has several tools that are useful for making embroidery designs for headwear.
  • Wilcom Embroidery Studio: Wilcom EmbroideryStudio is another well-known embroidery digitizing program with various tools for making embroidered patterns for headwear.
  • Pulse Embroidery Software: It is an all-inclusive embroidery digitizing program with several tools for designing embroidered patches and logos for headwear.

It’;s crucial to think about the software’;s features and capabilities and the skill level needed to utilize it effectively when selecting embroidery digitizing software for hats.

If you find these software difficult to operate, then you can contact us for your embroidery digitizing designs. Our digitizing experts manually digitize your designs with 100% quality guaranteed. So Klick hier and get you design done quickly. For an amazing offer, Lesen Sie weiter.

How To Hoop Cap Hats For Embroidery?

Before embroidering, hats and caps must be hooped. Whether you’;re a beginner or an expert, hooping caps can be challenging without correct guidance. People often post about unsuccessful embroidery hat projects and blame their machines.

They had no idea that improper cap hooping might have dire consequences. If your hoops aren’;t clean, the embroidery won’;t be clean when you do embroidery.

Please note that a cap Reifen attachment is required before continuing. The three primary parts of this attachment are:

How To Hoop Cap Hats For Embroidery
How To Hoop Cap Hats For Embroidery

Attachment of Hooping

Beschreibung

Driver

The driver goes over the machine’;s arm and fits perfectly.

Cap Frame

The cap frame is the part of the cap that holds the hat.

Jig

The jig holds the cap frame in place so that hoops are more accurately placed.

Step-By-Step Guide To Hoop A Cap For Embroidery

If you want a perfect hoop, folge diesen Schritten:

  1. Ensure that your cap frame is firmly attached to the jig.
  2. Place the peak mount and band out of the way and set the cap frame for the hat in place.
  3. Adjust the hat so the red line coincides with the central seam and the inner band is out of the way.
  4. Adjust the cap frame band or strap so that it fits correctly between the hat’;s top and the base of the cap.
  5. Cover the hat’;s peak with a protective cloth and secure the peak mount to prevent accidental marks when embroidering.

PREMIUM OFFER

Wenn Sie auf der Suche nach den besten Dienstleistungen für die Digitalisierung von Stickereien und Vektorgrafiken sind, dann EMdigitalisieren ist Ihre Anlaufstelle. Wir bieten derzeit an 50% Rabatt auf Ihre erste Bestellung und Sie können in nur wenigen Minuten ein KOSTENLOSES ANGEBOT erhalten 5 Minuten von unseren Experten.

So, Sind Sie bereit, Ihr Stickprojekt auf die nächste Stufe zu heben??

Bitte kontaktieren Sie uns, damit wir Ihre Bedürfnisse besprechen und gemeinsam Ihre Ideen in wunderschöne Kunstwerke verwandeln können.

Sie können auch mögen

You can embroider on the center, front, zurück, or side of the hat. Firstly you need to properly hoop the cap. Then apply a stabilizer if needed. Later, thread the machine and follow the instructions of your machine to embroider the design.

The size and complexity of the design and the embroidery shop determine the cost of hat machine embroidery. Jedoch, eine einfache Stickerei-Design would cost you between $10 und $50.

You may have to pay more if you want a more intricate pattern or if you need your hat embroidered soon. Andererseits, EM Digitizing offers quick turnaround times on designs at reasonable rates.

If you want to embroider a hat or cap, you’;ll need a special embroidery hoop or frame. You should hoop the hat so that the fabric is smooth and wrinkle-free. Apply an embroidered stabilizer layer to the hat and let it dry.

If you want to embroider on the side of a baseball cap, you should hoop it so that the side panel is taut. Insert the stabilizer under the side panel inside the cap. Follow your machine’;s guidelines to embroider the pattern.